Specification

www.intermatic.com
Energy Controls
Diagrams
T2000 Series
Specification
The time switch shall be of the 7-Day dial type, capable of permitting up to 42 ON and 42 OFF operations each week.
The time switch shall provide a minimum ON or OFF time of 2 hours per tripper to provide up to 6 ON/OFF operations
daily. Time switch to be powered by a _______________ (125)(208-277) VAC 60 Hz power supply. The time switch motor
shall be synchronous, which shall be designed to withstand a minimum of 6000 volt transients. The time switch motor
shall be connected to the supply terminals with ring-type connectors and shall not require more than 3 Watts to operate.
The time switch mechanism shall be a snap-in design to provide ease of mechanism removal from the enclosure. The
time switch enclosure shall be a Type 1 lockable steel enclosure, which shall be painted with an electrostatic process
to eliminate the potential for corrosion. The time switch enclosure shall provide a minimum of 31 cubic inches of wiring
space and shall provide a non-removable cover, which shall swing open a full 180 degrees. The time switch shall provide
a non-curling terminal insulator.
Switch conguration shall be SPDT with an agency listed switch rating of:
• 20 Amp, 125 and 208-277 VAC
• ½ HP, 125 VAC
• 1 HP, 250 VAC
The time switch shall be agency listed under Clock Operated Switches and shall be Intermatic model ___________.
(Model Numbers T2005, T2006).
Clock
Motor
NO NC COM CLOCK
125 VAC
Input
NC
Load
NO
Load
Neutral
Clock
Motor
250 VAC
Input
NC
Load
NO
Load
Line 1
Line 2
250 VAC
Input
Line 1
NO NC COM CLOCK