Brochure
In-Wall Timers
In-Wall Timers
61
Accessories/Replacement
Knob-Wall Switch FF Series - White 146MT577
Knob-Wall Switch FF Series - Black 146MT579
Faceplates See page 170
Mechanical Spring Wound Countdown Timers
Without HOLD With HOLD
Maximum
Time Switch Type
SPST
FF5M FF5MH
5 Min
FF15MC FF15MH
15 Min
FF30MC FF30MH
30 Min
FF60MC FF60MHC
60 Min
FF2H –
2 Hr
FF4H –
4 Hr
FF6H FF6HH
6 Hr
FF12HC FF12HHC
12 Hr
2 Circuit (1) NO + (1) NC
FF315M –
15 Min
FF330M –
30 Min
FF360M –
60 Min
FF32H FF32HH
2 Hr
FF34H FF34HH
4 Hr
FF36H –
6 Hr
FF312H FF312HH
12 Hr
DPST
FF415M –
15 Min
FF430M –
30 Min
FF460M –
60 Min
FF46H –
6 Hr
FF412H –
12 Hr
Spring Wound Countdown
Timers - Commercial
FF Series
The FF Series Commercial Countdown Timers are designed to replace any
standard wall switch and do not require electricity to operate. These
energy-efcient switches automatically limit the ON times for fans, lighting,
motors, heaters, and other energy consuming loads. A commercial "brushed
metal" look plate (plastic construction) meets NEC requirements.
Features
• No electricity required to operate
• Replaces any standard single or multi-gang wall switch
• Automatically limits ON time for energy consuming loads
• Quick and easy installation
• Time-saving up front terminal connection with teeter-type terminals
• Brushed metal look switch plate meets NEC requirements (plate is included)
• Incandescent/uorescent/CFL/LED compatible
• No neutral connection is required
Ratings
Operating Voltage 125-277 VAC, 60 Hz
Resistive 20 A, 125 VAC; 10 A, 250/277 VAC
Incandescent 7 A, 125 VAC
Motor 1 HP, 125 VAC
2 HP, 250 VAC
Operating Temperature 32º F to 104º F (0º C to 40º C)
Dimensions H x W x D 4
1
⁄8" x 1
3
⁄4" x 1
1
⁄4"
(104.8 mm x 44.5 mm x 31.8 mm)
Warranty 1-year limited
Note: Not for use with sunlamps, saunas, or loads that could
cause personal injury if timed incorrectly.
Compliant
Without HOLD
FF5M
With HOLD
FF6HH
*For SPDT Configuration
Jumper L1 & L2 Together
L1
L1
L2
L1
L2
SPST Configuration
DPST Configuration
L E D