Cut Sheet

Order number:
Specification
Apr 19, 2017
LED4537S
Ordering Information
LED4537SC
Time
Delay
Packaging
Unit Box,
4 color
1000 W
1800 VA
8 A
2-5 sec
Notes
C – is the packaging designation, please include when ordering product
Tungsten
Ballast
Electronic
(LED driver)
Order No.
The locking-type photo control shall be an electronic control based on a solid-state photo sensor and relay switch circuit.
Switch operation shall have a rating of 1000 Watts tungsten and 1800 Watts ballast at 347-480 VAC. For high in-rush LED
type fixtures, the photo control switch operation shall have a 8 Amp Electronic Ballast rating at 347-480 VAC. The photo
control should fail in an ON state. The photo control operating voltage shall be clearly identified on the control housing by
color code or unit label. The photo control shall be equipped with a 2-5 second delay action eliminating activation by light
flashes. The photo control shall be equipped with standard 3-prong twist and locking-type plug connection. The plug
connection terminals shall be solid brass. The photo control shall consist of industrial grade electronic components, 685
Joule MOV, solid state light sensor, and a 20 A relay. The photo control shall be 100% factory tested and function within
specified light levels. The photo control shall be agency certified and tested accordingly. The photo control shall meet agency
standards for locking-type devices and all other requirements of ANSI C136.10-2010. The photo control shall operate over a
temperature range of -40°F to 158°F (-40°C to 70°C). The photo control should have a manufacturer's limited warranty of 12
years minimum. The photo control shall be the electronic dusk-to-dawn type, Intermatic model LED4537S.
www.intermatic.com
347-480 VAC
Load Ratings
1.5 fc
2.25 fc
OFF
ON
Activation Details
Operating
Voltage
Page 2 of 3