User Guide

Page 5 of 35
Event - A program in the controller that will instruct the
controller to control various modules at a set day and time.
The HA07 can accommodate up to 28 events.
Module
– Any Intermatic Home Settings product that is
controlled with a remote controller.
Network
– All Intermatic Home Settings devices controlled
by the Master Controller and duplicate remote controls
operating on the same system. Each network has its own
unique identification code so that no one else can control the
system.
Primary Controller
– The first controller used to set up your
modules and network.
NOTE: Only the Primary Controller can be used to
include or delete modules from a network.
Scene
– Lighting modules assigned to the various channels
can be set at different levels, thus creating desired light
levels throughout your house called scenes. Scenes can
be set during the “Associating Modules To Channels” step
(see page 16) by choosing ON, OFF and/or DIM settings.
Secondary Controller
– A controller containing network
information about other modules within the network, and is
created the primary controller. Secondary controllers cannot
include or delete modules to the network.