User Guide

Page 31 of 35
Resetting the Controller
If needed, you can reset the NETWORK and CHANNEL
SETTINGS individually or both together.
NOTE: When resetting a controller, for best results, each
module within the system should be individually reset also.
Resetting the NETWORK only
1. Press and hold INCLUDE and DELETE buttons at the
same time for 10 seconds. The display will read,
“RESET”.
2. Hold the Channel 3 ON/DIM and OFF/DIM buttons until
the display reads, “NETWRK CLEAR”.
Resetting CHANNELS only
Follow the same procedure as Resetting the Network,
except press Channel 2 ON/DIM and OFF/DIM buttons in
step 2. The display will read, “CHAN CLEAR”.
Resetting NETWORK and CHANNELS
This reset function will completely reset the CLOCK,
PROGRAMMED EVENTS, CHANNEL, and NETWORK
SETTINGS on the controller.
Follow the same procedure as Resetting the Network,
except press Channel 1 ON/DIM and OFF/DIM buttons in
step 2. The display will read, “ALL CLEAR”.