User Guide

Page 30 of 35
Replicating the Network and Channel Settings (cont’d)
Fig 16c – Press and hold the Fig 16d – Press and release
INCLUDE button on the the Channel 1 OFF/DIM button
Secondary Controller. “Copy” on the Secondary Controller.
will be shown in the LCD display. “RA” which stands for “Receive
Release the INCLUDE button. ALL data” will be shown next to
“Copy”.
Replicating the Network only
Follow the same procedure as Replicating the Network
and Channel Settings, except in step 2, press Channel 2
ON/DIM, and in step 4, press Channel 2 OFF/DIM.
Notes on Primary and Secondary Controllers:
1. You cannot include or delete modules to or from
the network using a secondary controller.
2. Any time a change is made to the Primary
Controller, the secondary controllers should be
reprogrammed or updated using the Controller
Replication process (see page 28).
3. The maximum number of Z-Wave devices per
HA07 Master Controller, including other
controllers, is 192 devices.