User Guide

Page 29 of 35
Replicating the Network and Channel Settings (cont’d)
(Note: If the secondary controller is Home Settings Model
HA09 Handy Remote Controller, follow the same procedure
as the HA07 Master Remote. Instead of seeing the word
“COPY”, the 2 LEDs on the HA09 will flash simultaneously.)
The controllers will automatically synchronize with each
other and the word “SUCCESSFUL” will flash for 2 seconds
on the display (for HA09 Handy Controller, success is
indicated with a solid green LED for 2 seconds). If not
successful, the words “NOT SUCCESSFUL” will be
displayed for 2 seconds (for HA09 Handy Controller, the red
and green LED’s will flash for 2 seconds).
Fig 16a – Press and hold the Fig 16b – Press and release
INCLUDE button on the Primary the Channel 1 ON/DIM button
Controller. “Copy” will be shown on the Primary Controller. “TA”
in the LCD display. Release the which stands for “Transmit
INCLUDE button. ALL data” will be shown next to
“Copy”.