Operating Guide

LIMITED ONE-YEAR WARRANTY
If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the
original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which
have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp
bulbs, LED’s and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or
reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS
THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased or (b) completing a warranty claim online at www.intermatic.com. This warranty is made by:
Intermatic Incorporated, Customer Service 7777 Winn Rd., Spring Grove, Illinois 60081-9698. For warranty service go to: http://www.Intermatic.com or call 815-675-7000.
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081
www.Intermatic.com
Figure 4. Reset Button
Reset
Button
Timer
Day
h+ m+
+1h
OVR
Reset
Mode Timer Display Description
Auto ON
MO TU WE TH
FR SA SU
OVR
AUTO
ON
OFF
AM
PM
h
Appears when an
ON setpoint has
been triggered
Auto OFF
MO TU WE TH
FR SA SU
OVR
AUTO
ON
OFF
AM
PM
h
Appears when an
OFF setpoint has
been triggered
OVR ON
MO TU WE TH
FR SA SU
OVR
AUTO
ON
OFF
AM
PM
h
Indicates relay has
been overridden to
ON status
MO TU WE TH
FR SA SU
OVR
AUTO
ON
OFF
AM
PM
h
OVR OFF Indicates relay has
been overridden to
OFF status
158 --01783
3. Press h+ to scroll to the desired hour for ON event.
4. Press m+ to scroll to the desired minute for the ON event.
5. Press Timer to advance to the OFF event screen.
6. Press Day to select the days of the week for the OFF event.
7. Press h+ to scroll to the desired hour for the OFF event.
8. Press m+ to scroll to the desired minute for the OFF event.
Take one of these actions.
If… Then…
You need to program another ON/
OFF event pair,
Press Timer to advance to the
next event ON screen and repeat
steps 2 through 8.
All the required ON/OFF events
are programmed,
Press to return main screen.
The procedure is complete.
NOTE: If events include or intersect with each other, each ON/OFF event
can be independently executed at the setpoint.
NOTE: If an ON event and OFF event occur at the same time, the
timer will run the OFF event.
Daily Operation
Below is an overview of the different operation modes for FM1D14.
If you want to modify the… Then…
Days of the week for
ON/OFF event,
Press Day repeatedly to scroll to
desired days of the week
Go to step 3.
Hour for ON or OFF event, Press h+ to scroll to desired hour
Go to step 3.
Minute for ON or OFF event, Press m+ to scroll to desired minute
Go to step 3.
3. Repeat steps 1 and 2 as needed to modify additional events.
4. When all the desired events are modied, press to conrm event
settings and return to the time of day screen.
Deleting an Event
Follow this procedure to delete an event.
1. Press Timer to scroll to ON or OFF event you want to delete.
2. Press OVR to delete the event. Dashed lines appear in place
of the time to indicate the event is deleted.
NOTE: If necessary, repeat this procedure to delete both ON and OFF
settings for the event.
3. When the modications are complete, press to return to time of day
screen.
Retrieving an Event
The timer enables deleted events to be retrieved. All deleted events can be
retrieved until a new event is programmed in place of event.
1. Press Timer to scroll to the ON/OFF event you previously deleted.
Dashed lines appear in place of the event time.
2. Press OVR to retrieve deleted event. The event ON or OFF time replaces
the dashed line indicating that the event is retrieved.
NOTE: If necessary, repeat this procedure to retrieve both ON and OFF
settings for the event.
3. When the modications are complete, press to return to time of day
screen.
Adjusting Daylight Saving Time
Press +1h button to add the Daylight Saving Time hour to the current time or
remove the hour to return to standard time.
NOTE: Do not perform this procedure if your area does not use Daylight
Saving Time.
Resetting the Timer
In case of a timer malfunction or to
delete all previous settings, the unit
can be reset.
To reset the timer, use a blunt pointed
object to press Reset as shown in
Figure 4. The timer resets and deletes
all the settings in the unit.
NOTE: To execute an ON/OFF status override, press the OVR button on the
timer to override an ON or OFF status. The override remains active until the
next programmed event.
Modifying an Event
Follow this procedure to review or modify an event.
1. Press Timer to scroll to ON or OFF event you want to modify.
2. Take one of these actions.
Overview of FM1D14 Power Loss Functions
In the event of a power loss, the FM1D14 does the following:
• Relay will be in the OFF state.
• Upon power restore, relay will go to the current programmed state.