Instruction Manual 50 memories time switch
1 page Safety Precautions ....................................................................................... 2 OK reset 1. Prog Prog. Symbols, keys ......................................................................................... 3 Initial Start - Up .......................................................................... 4 Program Structure .................................................................................... 5 Setting 24h or am/pm clock, time and weekday.................
2 Safety precautions · The connection and installation of electrical devices may only be carried out by a qualified electrician. · Interventions in and changes to the device result in the voiding of the warranty claim. · Observe your national regulations and the respective safety provisions. · Switch-off commands have priority over switch-on commands.
OK 3 reset 1 6 12 18 24 D C $ F B A E G .&/6 1 H Res. I J K General information · The middle communication line shows the selectable menu item. If confirmed with OK, this item is activated. · Flashing texts or symbols require an entry. · If no entries are made within the next 2 minutes, the clock reverts to Auto mode.
1. 4 Initial start-up - selection of menu language 1 6 12 18 24 $ .&/6 1 Res. ) ) -"/(6"(& &4$ %"5&5*.& &4$ 0, MENU %&654$) &/(-*4) %&654$) 0, '3"/$"*4 &/(-*4) 0, 0, '3"/$"*4 &4$ Info In the delivered state the time switch is in the Auto mode with a preset time, date and the menu language English. Prog. 1 6 12 18 24 $ 1 .&/6 Res. %"5&5*.& 130(3".
Prog. 5 New program 3&7*&8 /&8 0, %&-&5& only with 2-channel version &4$ 0, '3&& $)"//&4&-&$5 $)"//&0, * 4&-&$5 0, * &4$ 0, &4$ 0, 4&-&$5 %": 0, $)- 0/ &4$ 0, )0634 $)- 0/ &4$ 0, .*/65&4 $)- 0/ &4$ 0, )0634 0, $)- 0'' &4$ 0, .*/65&4 $)- 0'' &4$ 0, 4"7&% 1 1 Info The time switch has 50 memory spaces. Example ON command for channel 1 at 3 pm. OFF command at 6 pm.
Prog. 6 View, edit program %&-&5& 3&7*&8 0, /&8 &4$ 0, 0/ 1 0, )) .. 0'' 1 &%5 0, 0, )) .. Info · The program steps can be scrolled through with ▼ ▲. · The respective program can be edited by pressing EDT. The procedure is the same as when creating a new program.
7 Set date and time -"/(6"(& %"5&5*.& 0, 130(3". &4$ 0, Info The date and time are preset at the factory. :&"3 .0/5) 0, &4$ 0, &4$ 0, %": &4$ 0, )0634 .*/65&4 0, &4$ 0, &4$ 0, Set AM/PM (12-hour-) or 24-hour display %":-*()5 ) ) 0, -"/(6"(& &4$ 0, ". 1.
8 Change for Daylight Savings time 130(3". %":-*()5 0, ) ) &4$ 0, Info The following settings are possible: AUTO Factory presetting of the published calendar dates. This is automatically recalculated for each year. $"-*#3"5 "650 0, /0 &4$ 0, /0 $"-*#3"5 0, "650 &4$ 0, 46 45"35 .0/5) &4$ 0, NO No switchover CALIBRAT Programming for the start and ending date / or daylight savings time must be entered for this purpose. The factory presetting is overwritten.
OVR 9 Operating mode Info Left-hand button = Channel 1 Right-hand button = Channel 2 (only with 2-channel version) 1 6 12 18 24 $ .&/6 1 Res.
10 WARRANTY If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable.
