Specification
www.intermatic.com
FD Series
Energy Controls
White Models Ivory Models Almond Models Time Cycle Switch Hold
FD5MW FD5M - 5 Minutes SPST No
FD15MWC FD15MC FD15MAC 15 Minutes SPST No
FD15MHW FD15MH - 15 Minutes SPST Ye s
FD30MWC FD30MC FD30MAC 30 Minutes SPST No
FD30MHW FD30MH - 30 Minutes SPST Ye s
FD60MWC FD60MC FD60MAC 60 Minutes SPST No
FD60MHW FD60MH - 60 Minutes SPST Ye s
FD2HW FD2H - 2 Hours SPST No
FD4HW FD4H - 4 Hours SPST No
FD6HW FD6H - 6 Hours SPST No
FD6HHW FD6HH - 6 Hours SPST Yes
FD12HWC FD12HC - 12 Hours SPST No
FD12HHW FD12HH - 12 Hours SPST Yes
FD32HW FD32H - 2 Hours SPDT No
FD34HW FD34H - 4 Hours SPDT No
- FD36H - 6 Hours SPDT No
- FD415M - 15 Minutes DPST No
FD430MW FD430M - 30 Minutes DPST No
FD460MW FD460M - 60 Minutes DPST No
FD46HW FD46H - 6 Hours DPST No
Specification
The time switch shall be of the appropriate dimensions and design to provide direct replacement of a standard wall
switch in single or multi-gang 2 ½" deep junction boxes. The timer shall include a molded _________ (Almond)(Ivory)
(White) knob and plate with a spiral time scale to provide easy selection of the time setting. The molded plate (time dial)
and knob shall be the standard industry accepted______________ (Almond)(Ivory)(White) and shall provide for installation
using a standard toggle or standard decorator wall switch plate without modications. The knob shall be a press on type
requiring no screws or other hardware to secure. The threaded hole for plate mounting shall be extruded to provide a
minimum of .085" thread engagement. Switch Rating (Each Pole for DPST Models).
The timer shall have a UL listed rating of:
• 1 HP at 125 VAC, 50/60 Hz
• 2 HP at 250 VAC, 50/60 Hz
• 20 Amp, 120 VAC, 50/60 Hz
• 10 Amp, 250 VAC, 50/60 Hz
• 10 Amp, 277 VAC, 50/60 Hz
• 7 Amp, 125 VAC
The timer eld wiring connections shall be secured by means of a teeter-type terminal screw to provide secure
connections for appropriate wire sizes. The timer shall be _____________ (SPST)(DPST)(SPDT). The timer __________
(Shall)(Shall Not) have a Hold feature and shall have a time cycle of _____________ (See Time Cycles Listed). The timer
shall be Intermatic model _______________ (See Model Numbers Listed).