Specification

ET8015, ET8215 Models
N.O. Contact Ratings: Resistive: 30 Amps @ 120/240 VAC
Resistive: 20 Amps @ 28 VDC
Inductive: 30 Amps @ 120/240 VAC
Tungsten: 5 Amps @ 120/240 VAC
Ballast: 20 Amps @ 120-277 VAC
Motor: 1 HP @ 120 VAC
Motor: 2 HP @ 240 VAC
ET8115 Models
N.O./N.C. Contact Ratings: Resistive: 20 Amps (N.O.), 10 Amps (N.C.) @ 120/240 VAC
Inductive: 20 Amps (N.O.), 10 Amps (N.C.) @ 120/240 VAC
Tungsten: 5 Amps (N.O.) @ 120/240 VAC
Ballast: 20 Amps (N.O.), 3 Amps (N.C.) @ 120-277 VAC
Motor: 1 HP (N.O.), ¼ HP (N.C.) @ 120 VAC
Motor: 2 HP (N.O.), ½ HP (N.C.) @ 240 VAC
Pulse Feature: 2-circuit models feature 2-second pulse option for contactor and bell
ringing applications.
Auto DST: Automatic adjustment for Daylight Saving Time
Battery Backup: Two eld-replaceable AAA batteries maintain date and accurate time for a
minimum of three years. Batteries can be replaced when power to mechanism
is activated.
Wiring Terminals: #18 to #10 AWG wire
Minimum ON/OFF Time: 1 minute
Maximum ON/OFF Time: 6 days, 23 hours 59 minutes
Warranty: Limited 1 year
Model Number Circuits Switch Volts AC Rating Enclosure Shipping Weight
ET8015C 1 SPST 120, 208, 240, 277 30 Amps Type 1 Steel 2.9 lbs. (1.3 kg)
ET8015CPD82 1 SPST 120, 208, 240, 277 30 Amps Type 3R Plastic 3.6 lbs. (1.6 kg)
ET8015CR 1 SPST 120, 208, 240, 277 30 Amps Type 3R Steel 3.6 lbs. (1.6 kg)
ET8115C 1 SPDT 120, 208, 240, 277 20/10 Amps Type 1 Steel 2.9 lbs. (1.3 kg)
ET8115CPD82 1 SPDT 120, 208, 240, 277 20/10 Amps Type 3R Plastic 3.6 lbs. (1.6 kg)
ET8115CR 1 SPDT 120, 208, 240, 277 20/10 Amps Type 3R Steel 3.8 lbs. (1.7 kg)
ET8215C* 2 SPST 120, 208, 240, 277 30 Amps Type 1 Steel 3.0 lbs. (1.4 kg)
ET8215CPD82* 2 SPST 120, 208, 240, 277 30 Amps Type 3R Plastic 3.6 lbs. (1.6 kg)
ET8215CR* 2 SPST 120, 208, 240, 277 30 Amps Type 3R Steel 3.7 lbs. (1.7 kg)
*Can be wired to DPST
Specification
The 7-Day Astronomic electronic-type time switch shall be capable of permitting up to 28 ON/28 OFF events. In addition,
the time switch shall include selectable Astronomic (dusk/dawn) settings for each day and circuit to allow load switching
at sunset and/or sunrise without a photo control device. The time switch shall provide a minimum ON or OFF time of 1
minute. The time switch to be powered by ___ (120)(208)(240)(277) VAC, ___ (50)(60) Hz power supply. The time switch
mechanism features a snap-in design to provide easy mechanism removal for mounting the enclosure. The time switch
enclosure shall be a _____ (Type 1 Steel)(Type 3R Steel)(Type 3R Plastic) lockable enclosure that shall be painted with an
electrostatic process to eliminate the potential for corrosion. The time switch shall provide clear terminal
identication on a see-through non-curling terminal insulator. Terminal connections shall be made using teeter-type
terminal screws to provide secure connections for wire sizes up to #10 AWG. Switch conguration shall be _____ (SPST)
(DPST)(SPDT) with a UL or CSA listed switch rating of:
(If SPST:)
• Resistive: 30 Amps @ 120/240 VAC
• Resistive: 20 Amps @ 28 VDC
• Inductive: 30 Amps @ 120/240 VAC
• Tungsten: 5 Amps @ 120/240 VAC
• Ballast: 20 Amps @ 120-277 VAC
• Motor: 1 HP @ 120 VAC
• Motor: 2 HP @ 240 VAC
The time switch shall be UL or CSA listed under UL category 916 Energy Management Equipment and shall be
Intermatic model ________________(See Model Numbers Listed).
www.intermatic.com
Energy Controls
ET8000 Series
(If SPDT:)
• Resistive: 20 Amps (N.O.), 10 Amps (N.C.) @ 120/240 VAC
• Inductive: 20 Amps (N.O.), 10 Amps (N.C.) @ 120/240 VAC
• Tungsten: 5 Amps (N.O.) @ 120/240 VAC
• Ballast: 20 Amps (N.O.), 3 Amps (N.C.) @ 120-277 VAC
• Motor: 1 HP (N.O.), ¼ HP (N.C.) @ 120 VAC
• Motor: 2 HP (N.O.), ½ HP (N.C.) @ 240 VAC