Cut Sheet

PAGE 1
EK4336S NETS i Electronic Photo Control Wall Mount Project: EK4336S 8 Location: Wall Mount Electronic Photo Control pre] — Product Type: The EK43368S is an electronic photo control that fits in a standard Contact/Phone: outlet box. Product includes a gasket ed wall plate for a watertight Model #: installation to a standard outlet box. It features a silicon light sensor with zero-crossing circuit to provide a long service life.
PAGE 2
Tr ERRATIC' Specification The photo control shall be an electronic control based on a dolls-state photo sensor and relay switch circuit. Switch operation shall have a rating of 1000 Watts tungsten and 1800 W ballast at 105-305 VAC. For high inrush LED type fixtures, the photo control switch operation shall have a 6 Amp Electronic Ballast rating at 105-305 VAC. The photo control shall fail in an ON state. The photo control operating voltage shall be clearly identified on the control housing.