Specification
www.intermatic.com
Energy Controls
EK4236S & EK4736S
Specification
The photo control shall be an electronic control based on a solid-state photo sensor and relay switch circuit. Switch
operation shall have a rating of 1000 Watts tungsten and 1800 Watts ballast at 105-305 VAC. For high inrush LED type
xtures, the photo control switch operation shall have a 6 Amp Electronic Ballast rating at 105-305 VAC. The photo
control shall fail in an ON state. The photo control operating voltage shall be clearly identied on the control housing. The
photo control shall be equipped with inherent delay action eliminating activation by light ashes. The photo control shall
have a swivel arm for reorientation after installation. It also shall have a ½" NPSM threaded steam for t to standard ½”
knockouts in common electrical boxes and light xtures and have min 6” long, 18 awg wire leads. The lens for light input
shall be located in the top☐ /side☐ of the photo control. The photo control shall consist of industrial grade electronic
components: 255 Joule MOV, solid state light sensor and silver alloy relay contacts. The photo control shall be 100%
factory tested and function within specied light levels. The photo control shall be agency certied and tested
accordingly. The photo control shall meet agency standards and all other requirements of ANSI C136.24. The photo
control shall operate over a temperature range of -40°F to 158°F (-40°C to 70°C). The photo control should have a
manufacturer's limited warranty of 8 years minimum. The photo control shall be the electronic dusk-to-dawn type,
Intermatic model _______________.
300KP10049
Limited Product Warranty
(1) What is Covered By This Limited Warranty?
Intermatic Incorporated (“Intermatic”) warrants Intermatic’s EK4136S (“Product”) to be free from defects in material or workmanship for a period of
eight (8) years from date of purchase. This warranty is extended to the owner of the light xture on which the photo control is installed only and is
non-transferable (“purchaser”). If the purchaser discovers a defect in material or workmanship, the purchaser must promptly submit a warranty claim.
Upon a determination by Intermatic that the Product is defective, Intermatic shall correct any defect in material or workmanship by replacing the
Defective Product. Any repair to Product, including both parts and labor, shall be at Intermatic’s expense. The foregoing remedy is the purchaser’s
exclusive remedy for a breach of warranty. The product must be installed in the appropriate application in complete accordance with the installation
instructions. The Product must not be opened, modied, exposed to extreme heat or cold, submerged or subjected to abnormal use or service.
Product failures due to damage by accident, dropping, or abuse in handling, acts of God, or any negligent use, are not covered by this warranty.
Intermatic shall determine, in its sole discretion, whether any Product returned by a purchaser has been used in accordance with its instructions, is an
appropriate model for the purchaser’s use thereof, and whether the Product is defective.
(2) Disclaimer of Warranty
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER EXPRESSED WARRANTIES. TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION OF THIS LIMITED WARRANTY.
(3) Limitation of Remedies
IN NO CASE SHALL INTERMATIC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH EXCLUDED DAMAGES INCLUDE, BUT
ARE NOT LIMITED TO, DAMAGE TO SOFTWARE, LOSS OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES,
DOWNTIME, THE CLAIMS OF THIRD PARTIES INCLUDING CUSTOMERS, DAMAGE TO PROPERTY AND PERSONAL INJURY. SOME STATES DO
NOT ALLOW LIMITS ON WARRANTIES OR ON REMEDIES FOR BREACH IN CERTAIN TRANSACTIONS, IN SUCH STATES, THE LIMITS IN THIS
PARAGRAPH AND IN PARAGRAPH (2) MAY NOT APPLY.
(4) Time Limit for Bringing Suit
No action arising out of any claimed breach of warranty may be brought more than one year after the cause of action has occurred.
(5) No Other Warranties
Unless modied in writing signed by both parties, this agreement is understood to be the complete and exclusive agreement between the parties,
superseding all prior agreements, oral or written, and all other communications between the parties relating to the subject matter of this agreement. No
employee of Intermatic or any other party is authorized to make any warranty in addition to those made in this agreement. This warranty is made by:
Intermatic Incorporated/After Sales Service, 7777 Winn Rd., Spring Grove, IL. 60081-9698/815-675-7000 http://www.intermatic.com
(6) Claim Procedure
The warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along
with proof of purchase, postage prepaid, to the authorized service center listed below.
Address all communications and products returns to:
Intermatic Warranty Coordinator
7777 Winn Road Spring Grove, Illinois 60081-9698, Fax: 815-675-7055
Diagrams
L1: BLACK
L2/N: WHITE
LOAD: RED
GASKET
DO NOT
MOUNT WITH
THE WIRES
FACING UP.
NUT