Install Instructions

E200 Outdoor Enclosures
• Attractive appearance
•
Outdoor Enclosure, color: Dark Gray
•
High impact all-plastic enclosure eliminates rust and
corrosion
•
Rugged heavy duty construction
•
Secure, easy to operate latch
•
Provision for padlock or seal
•
Five combination 1/2” and 3/4” knockouts
The E200, is an outdoor rated plastic enclosure
which provides mounting for most Intermatic
electromechanical and electronic time switches.
These enclosures are also well-suited for use as
enclosures for pool controls, relays, contractors,
and other control or electrical mechanisms.
The E200 is TYPE 3R “Rainproof” rated
for outdoor and wet or dusty locations.
Bosses are provided for mounting of a DIN
rail, any Intermatic control or a sub-panel for
mounting other types of devices.
Additional bosses provide a means of
mounting a Printed Circuit Board assembly.
Provision for interior cover panel is also
provided.
DESCRIPTION:
E200 Outdoor Enclosure
FEATURES:
• Bonding between conduit connections is not automatic and must be provided as part of the installation.
• For outdoor locations, raintight, or wet locations, conduit hubs that comply with requirements of the UL514B (standard for
fitting for conduit and outlet boxes) are to be used.
WARNING
Risk of Fire or Electric Shock
• La liaison entre les raccordements de conduits n’est pas automatique et doit être prévue dans le cadre de l’installation.
• Pour les installations extérieures, utiliser des embouts de raccordement de conduit étanches ou pour zone humide conformes
aux exigences d’UL514B (norme sur les raccords de conduit et les boîtiers de prises).
AVERTISSEMENT
Risque d’incendie ou de choc électrique