User's Manual Part 2
Six: Programming the Hand-Held Transmitter 43
Providing a brighter solution.™
Everyday Use of the Hand-Held Controller
The complete everyday functionality of the pool/spa system you have installed can be
conveniently controlled using the Hand-Held Remote.
Changing between Pool and Spa
The Valve Actuator (PE24VA) that you have installed in the system directs water either to the
pool or the spa. To use the hand-Held Controller to control this valve:
Press any button on the Hand-Held Remote to wake it from sleep.
(The unit goes to sleep to conserve battery life when it has been idle
for 30 seconds.) The screen display on the Hand-Held looks like the
example on the right.
Note on the Hand-Held Remote Screen the current mode for the
system:
POOL on the left side of the screen indicates the pool temperature setting (shown in the
example).
SPA on the right side of the screen indicates the spa temperature setting.
Press the <P/S> button. The system will change to the opposite mode from its current setting.
:
Note the change on the Hand-Held Remote Screen. In the example
at the right, the mode is now changed to Spa, and the temperature
shown is the water temperature of the Spa.
NOTE: The large temperature display shown on the Hand-Held Remote
Screen reects the current water temperature of the Pool or Spa,
depending on which mode is active.
Setting Pool and Spa Temperatures
If connected and linked, the Hand-Held Remote controls the independent water temperatures of
both the pool and spa.
View the current temperature on the right side of the Hand-Held Remote Screen under the
word SET.
P = current pool water set temperature
S = current spa water set temperature
Press the <P/S> button if necessary to change the system to Pool or Spa mode.
Press the <UP> or <DOWN> arrow buttons to raise or lower the setting to the desired
temperature. You can hold the button down and the value will automatically change.
Release the arrow button when the setting reaches the temperature you want. After a few
seconds, the display returns to the current temperature of the pool or spa, depending on
which mode you select.
1.
2.
•
•
3.
4.
1.
•
•
2.
3.
4.
STAT
OK
POOL
72
ºF SET
P 72
S 85
STAT
OK
POOL
72
ºF SET
P 72
S 85
STAT
OK
SPA
85
ºF SET
P 72
S 85
STAT
OK
SPA
85
ºF SET
P 72
S 85