User's Manual Part 2

40 I-Wave Installation Guide
Copyright © 2006 Intermatic, Inc.
Press and hold the <P/S> and <CHLR> buttons at the same time for
about 5 seconds. This will put the device in programming mode, as
shown at the right.
Press the <4> function button to select
RESET CONTROLLER. The screen
refreshes and displays only the line 4
RESET CONTROLLER, then returns to the
full screen with the word SUCCESS at the
bottom, as shown..
Now press the <3> function button on the Hand-Held Remote to
select RESET NODE. The screen refreshes and displays only the line
3 RESET NODE.
Press the black button on the base of the Panel-Mounted Transceiver.
The display returns to the full screen with the word SUCCESS at the
bottom, as shown.
The two devices are now “clean” and are ready to be linked together
within the network you have installed.
Linking the Hand-Held Remote to the Receiver
If necessary, press any button on the Hand-Held Remote to wake it
from sleep. (The unit goes to sleep to conserve battery life when it
has been idle for 30 seconds.) The screen display on the Hand-Held
looks like the example on the right.
Press and hold the <P/S> and <CHLR> buttons at the same time for
about 5 seconds. This will put the device in programming mode, as
shown at the right.
Press the <1> function button to select INCLUDE NODE. The screen
refreshes and displays only the line 1 INCLUDE NODE, as shown.
2.
3.
4.
5.
1.
2.
3.
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
LEARN VER x
4 RESET CONTROLLER
LEARN VER x
4 RESET CONTROLLER
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
SUCCESS
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
SUCCESS
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
SUCCESS
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
SUCCESS
LEARN VER x
3 RESET NODE
LEARN VER x
3 RESET NODE
STAT
POOL
OO
ºF SET
P OO
S OO
STAT
POOL
OO
ºF SET
P OO
S OO
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
LEARN VER x
1 INCLUDE NODE
2 ADD TO GROUP
3 RESET NODE
4 RESET CONTROLLER
5 MORE OPTIONS
C EXIT
LEARN VER x
1 INCLUDE NODE
LEARN VER x
1 INCLUDE NODE