User Manual

21-3609E rev1.0 xL Regional Settings Guide
53
A0xxÈ02 Keypad Selections
NOTE: “xx” represents the area number.
(left to right on keypad screen) N America Example:
Name Selections Description Regional Settings Default
N America 0
European 3
U.K. ACPO 3
Aus/NZ 0
China/H.K. 3
Netherlands 3
Switzerland 3
Exit Delay Warning
Type
0 = Normal, 1= Warning tones
during Exit Delay, 2= Warning
tones continuous 3= Warning
tones continuous + Blocked
arming
France 3
N America 2
European 2
U.K. ACPO 2
Aus/NZ 2
China/H.K. 2
Netherlands 2
Switzerland 2
Pre-Alarm Delay
0=20sec; 1=30s; 2=60s; 3=5min;
4=10m; 5=30m; 6=1hr; 7=1.5hrs
During the delay, keypad
sonalert(s) will be sounded,
giving an authorized user time to
"Silence" the alarm at a keypad.
(Selecting "Verify User" will
cancel the alarm transmission.)
NOTE: This setting works only
with sensors (input-points) that
support "Pre-Alarm Warning".
For details, refer to "T080 –
T099 (Custom Input-Point
Types)".
France 2
N America 0
European 0
U.K. ACPO 0
Aus/NZ 1
China/H.K. 0
Netherlands 0
Switzerland 0
Report Mode
0 = Emergency
1= Full Reporting
System signals transmitted by
system dialer to monitoring
station.
France 0
N America 0
European 2
U.K. ACPO 2
Aus/NZ 0
China/H.K. 2
Netherlands 2
Switzerland 2
Siren Squawk on
Arming
0 = Normal, 1=On Arming, 2 =
Fail to Arm, 3 = On Arming Or
Fail to Arm
The 'siren' outputs for this area
will be pulsed briefly when the
area is armed to indicate arming
was successful.
France 2
N America
(no)
European
(no)
U.K. ACPO
(no)
Aus/NZ
(no)
China/H.K.
(no)
Netherlands
(no)
Switzerland
(no)
Function Key PIN
Required
9(yes) (no)
Whether a user with "Function
Key" authority will need to log in
to use programmable function-
keys 6 – 9 & 0.
France
(no)
N America
(no)
European
(no)
U.K. ACPO
(no)
Aus/NZ
(no)
China/H.K.
(no)
Netherlands
(no)
Switzerland
(no)
Dual Custody
9(yes) (no)
Two valid user ID / PINs needed
to disarm
this area.
France
(no)
0·2·0·0· ···
ÈSave A001È02