User Manual

21-3609E rev1.0 xL Regional Settings Guide
11
Exit Delay Level Tone Warnings
Selections: Stay+On, On
Only, None.
Selections: Yes/No
Regional Setting Default: Regional Setting Default:
N America Stay+On N America Yes
European Stay+On European Yes
U.K. ACPO Stay+On U.K. ACPO Yes
Aus/NZ Stay+On Aus/NZ Yes
China/H.K. Stay+On China/H.K. Yes
Netherlands Stay+On Netherlands Yes
Switzerland Stay+On Switzerland Yes
France Stay+On France Yes
Regional Setting Default:
N America 9(Yes) for Area 1
European 9(Yes) for Area 1
U.K. ACPO 9(Yes) for Area 1
Aus/NZ 9(Yes) for Area 1
China/H.K. 9(Yes) for Area 1
Netherlands 9(Yes) for Area 1
Switzerland 9(Yes) for Area 1
Annunciate Area Map
(Keypad tones)
Press the button below “ÈEdit “ to make changes. Scroll through the areas at the
top of the screen using the left and right keypad arrows. When an area appears
that needs to cause this keypad in this area to annunciate tones for e.g. alerts, exit
tones from the other area, press the keypad button below ÈYes or ÈNo to assign
the other area(s) to this keypad. A check mark
9will appear beside the Yes or No
selection.
France 9(Yes) for Area 1
Regional Setting Default:
N America 9(Yes) for Area 1
European 9(Yes) for Area 1
U.K. ACPO 9(Yes) for Area 1
Aus/NZ 9(Yes) for Area 1
China/H.K. 9(Yes) for Area 1
Netherlands 9(Yes) for Area 1
Switzerland 9(Yes) for Area 1
Arm Disarm Map (Arm/Disarm other areas)
Press the button below “ÈEdit “ to make changes. Scroll through the areas at the
top of the screen using the left and right keypad arrows. When an area appears
that needs to be armed /disarmed from this keypad, press the keypad button
below ÈYes or ÈNo to assign the other area(s) to this keypad. A check mark
9will appear beside the Yes or No selection.
France 9(Yes) for Area 1
Regional Setting Default:
N America 9(Yes) for Area 1
European 9(Yes) for Area 1
U.K. ACPO 9(Yes) for Area 1
Aus/NZ 9(Yes) for Area 1
China/H.K. 9(Yes) for Area 1
Netherlands 9(Yes) for Area 1
Switzerland 9(Yes) for Area 1
Exit Delay Map (what areas will there be an exit delay in)
Press the button below “ÈEdit “ to make changes. Scroll through the areas at the
top of the screen using the left and right keypad arrows. When an area appears
that needs to also have an exit delay when the area this keypad is assigned to is
armed, press the keypad button below ÈYes or ÈNo to assign the other area(s) to
this keypad. A check mark
9will appear beside the Yes or No selection.
France 9(Yes) for Area 1
Single Badge Mode
Single Badge Mode Hold Badge Mode
System response when momentarily touching an
access card etc. to e.g. an LCD G-Prox keypad.
Selections: Tgl (toggle)OFF-ON, TglSTAY-ON,
Ext Exit Dly (external exit delay), Work Late, None,
Auto logon, Arm ON, Arm ST (Stay) DisarmSTAY,
Disarm OFF.
System response when holding an access card etc.
to e.g. an LCD G-Prox keypad.
Selections: None, Auto logon, Arm ON, Arm
ST (Stay), DisarmSTAY, Disarm OFF, Tgl
(toggle) OFF STAY, Tgl OFF-ON, TglSTAY-
ON, ExtExitDly (external exit delay), Work Late.
Regional Setting Default: Regional Setting Default:
N America Auto log on N America Tgl OFF-ON
European Disarm OFF European Arm ON
U.K. ACPO Disarm OFF U.K. ACPO Arm ON
Aus/NZ
None
Aus/NZ
None
China/H.K. Disarm OFF China/H.K. Arm ON
Netherlands Disarm OFF Netherlands Arm ON
Switzerland Disarm OFF Switzerland Arm ON
France Disarm OFF France Arm ON