User Manual

xL Regional Settings Guide
21-3609E rev1.0
8
Communications
Telco Modem Type Enable Line Fail Line Fail Polarity Report Account #
Selections:
Bell 103, 8OPSTU
(REDCARE), WW Modem,
WW 8OPSTU, None.
Selections:
WW 8OPSTU or 8OP STU must
be plugged in.
Selections:
Positive/Negative
WW 8OPSTU or 8OP STU must
be plugged in.
Selections:
000000
Regional Setting Default: Regional Setting Default: Regional Setting Default: Regional Setting Default:
N America Bell 103 N America No N America Positive N America 00000 for All
European WW Modem European Not Used European Not Used European
U.K. ACPO WW 8OPSTU U.K. ACPO Not Used U.K. ACPO Not Used U.K. ACPO
Aus/NZ WW 8OPSTU Aus/NZ Not Used Aus/NZ Not Used Aus/NZ
China/H.K. WW Modem China/H.K. Not Used China/H.K. Not Used China/H.K.
Netherlands WW Modem Netherlands Not Used Netherlands Not Used Netherlands
Switzerland WW Modem Switzerland Not Used Switzerland Not Used Switzerland
France WW Modem France Not Used France Not Used France
Telco Report Mode No Blind Dialing Telco Format Comms Test Delay
Selections:
Not used, Primary, Backup,
Dual Dialer.
Selections: Yes/No
Dials regardless of detecting a
dial tone.
Selections:
SIA (Level 2), CID.
Selections: Delay Table
Regional Setting Default: Regional Setting Default: Regional Setting Default: Regional Setting Default:
N America Not Used N America Yes N America SIA N America 0 seconds
European Not Used European Yes European SIA European 0 seconds
U.K. ACPO Not Used U.K. ACPO Yes U.K. ACPO SIA U.K. ACPO 0 seconds
Aus/NZ Not Used Aus/NZ Yes Aus/NZ SIA Aus/NZ 0 seconds
China/H.K. Not Used China/H.K. Yes China/H.K. SIA China/H.K. 0 seconds
Netherlands Not Used Netherlands Yes Netherlands SIA Netherlands 0 seconds
Switzerland Not Used Switzerland Yes Switzerland SIA Switzerland 0 seconds
France Not Used France Yes France SIA France 0 seconds
Primary Telephone
Number
Backup Telephone
Number
Selections: blank
16 characters
Selections: blank
16 characters
Regional Setting Default: Regional Setting Default:
N America N America
European
European
U.K. ACPO U.K. ACPO
Aus/NZ
Aus/NZ
China/H.K.
China/H.K.
Netherlands
Netherlands
Switzerland
Switzerland
France
France
A phone number can be preceded with P =pulse dialing (default), or T =Tone dialing, and can include D =2 sec Delay, A =Star key
(tone dialing)
, # = Pound Sign (tone dialing), and/or W = Wait for second dial tone. For Tone dialing, ensure the phone line
supports this.