MONITOR ISM™ / AFx™ Multi-Tenant Security System User Guide V1.
Multi-Tenant Security System User Guide Welcome New Users! There are two types of suite security keypads. Follow the instructions in the proceeding columns under the picture of the keypad that you have. But first… Be sure to ask your Security Representative – • What your temporary PIN (Personal Identification Number) is to operate your keypad and the system? Each suite is set up with a single Master User # 1 PIN like 1-2-3-4 to get you started and be able to access all the features.
System Quick Reference Guide 8 Zone Keypad 1 2 3 4 5 6 7 2 Zone Keypad 8 S T 1 2 3 4 5 6 X 7 ! 8 9 f 0 Zone 1 2 3 4 5 6 7 8 Sensor Name Zone 1 2 Sensor Name Send Help Buttons FIRE POLICE SPECIAL ALERT NAME No No No Yes Yes Yes Yes SPECIFIC ALERT NAME No Special Command Button(s) Command Button # 1 Yes No NAME Command Button # 2 Yes No Special Command Button Yes No NAME NAME For Either Keypad Entry delay time Quick Arm Feature User ID 1 2 3 4 5 6 7
Multi-Tenant Security System User Guide An Overview The Suite Security Keypads 9 Identifying the keypad’s buttons and lights. 9 Comparing the two keypad’s similar features.
8 Zone Keypad Operation 1 2 3 4 5 6 7 2 Zone Keypad Operation 8 S 1 2 3T 4 5 6 X 7 ! 8 9 f 0 ! To do a “SEND HELP” Alert (to Building Security) Press both buttons at the same time on either side of the keypad symbols. Example: Press the and specific alert: # keys at the same time for a # for fire dept. for police Check with your Security Representative to find out the details of your specific alert.
8 Zone Keypad Operation 1 2 3 4 5 6 7 8 2 Zone Keypad Operation S 1 2 3T 4 5 6 X 7 ! 8 9 f 0 When the system is Fully ON, the light under the key symbol on the keypad will flash. No protection point lights will be lit. When the system is in STAY, because you are STAYing inside, only the doors and windows are protected. The key symbol light is on steady and will not flash.
Zone Keypad Operation 1 2 3 4 5 6 7 2 Zone Keypad Operation 8 S 1 2 3T 4 5 6 X 7 ! 8 9 f 0 Turning the System On Remotely If you left and forgot to turn the system on, it can be remotely armed by the building security dept. Contact the guard, identify your suite and ask the guard to turn the system on. Verify User If you think you have caused a false alarm (keypad tones continuously) you can notify the Security Dept. that YOU are on the premises before contacting them by phone.
8 Zone Keypad Operation 1 2 3 4 5 6 7 2 Zone Keypad Operation 8 S 1 2 3T 4 5 6 X 7 ! 8 9 f 0 Special Command If you had a special command arranged to activate a special function. Check with your Security Dept. Press then 1 Repeat the same sequence to turn the command off. for Special Command #1 Press then 2 Press then 5 once to turn feature on. Repeat to turn off.
8 Zone Keypad Operation 1 2 3 4 5 6 7 8 2 Zone Keypad Operation S 1 2 3T 4 5 6 X 7 ! 8 9 f 0 Adding a New User continued • Now enter the new user’s PIN # A Master User can not change their Authority Level • Enter the new user’s PIN # again to confirm it. The new user should now be programmed. Test the PIN by turning the system ON and use the new PIN to turn it off.
Multi-Tenant Security System User Guide 1 2 3 4 5 6 7 8 S 1 2 3T 4 5 6 X 7 ! 8 9 f Additional Commands for the 8 Zone Keypad Only 0 Identifying a user’s ID number After this command is entered, the user’s ID # (2-8, the master user usually being 1) will display on the 8 th sensor zone lights. Example, if user’s PIN entered belongs to the 5 user, sensor zone light # 5 will turn on.
Multi-Tenant Security System User Guide Keypad Lights continued Light Display Meanings • Armed and Trouble • Sensor Zone – combined – Flashing – On • Ready, Armed and Trouble • Sensor Zone(s) – combined – Flashing – On − Indicates the system had an alarm condition, when the system is turned off. − The sensor zone that had the alarm will indicate by being on. − Stops automatically or press X to stop on 8 Zone Keypad. press # to stop on 2 Zone Keypad. − Walk Test in progress.
Multi-Tenant Security System User Guide Keypad Tones continued Tone Type Sound Meanings Exit with a sensor zone bypassed Key Protest Key feedback Eight short beeps Fast short beeps Single fast beep Key Confirmation Single long beep Alarm notification when entering main entrance Alarm occurred during the last time the system was armed Exit With Trouble High speed pulsed tone Single short beeps − Warning that arming is occurring with a protection point or points bypassed.
#
