VR1910 VR1910-R3 VR1910WDM VR1910WDM-R3 VR1920 VR1920-R3 VR1930WDM VR1930WDM-R3 VT1910 VT1910-R3 VT1910WDM VT1910WDM-R3 VT1920 VT1920-R3 VT1930WDM VT1930WDM-R3 IFS Fiber Module Installation & Operation Instructions P/N 1062800 • REV B • ISS 01JUL11
VT/VR1900 OFF OFF RS232 DATA ON RS422 DATA ON 2-WIRE RS485 DATA 4-WIRE RS485 DATA 1 2 OFF OFF 1 2 OFF ON ON 1 2 ON 1 2 ON ON 7 6 5 4 3 2 1 Tamper Switch 7 6 5 4 3 2 1 Tamper Switch - Data Input +Data Input 7 6 5 4 3 2 1 Tamper Switch - Data Input/ Output +Data Input/ Output 7 6 5 4 3 2 1 Tamper Switch - Data Input +Data Input Data Input Data Output Ground - Data Output +Data Output - Data Output +Data Output OFF NOT USED ON 1 2 ON NOTE: Switch 3 ON: will pass data.
2W 485 4W 485 1 OFF OFF ON ON 2 OFF OFF OFF ON 3 OFF = TAMPER SW ON = BYPASS TAMPER SW SW 232 1 2 3 422 VT1910 FM VIDEO TRANSMITTER + DATA TRANSCEIVER POWER - DATA (IN/OUT) + DATA (IN/OUT) RS232 DATA OUT - DATA OUT RS422/ 4W RS485 + DATA OUT - RS422/ 2W RS485 RS232 7 6 5 4 3 2 1 Video source VIDEO INPUT ifs CARRIER DETECT TAMPER SWITCH OPTICAL OUT International Coax cable Fiber OPTICAL IN Systems Incorporated -2 + 12 VDC - 1 Black wire Black with white stripe Duplex multimode fib
VT1900 A 1 2 3 A Power LED illuminates NOTE: WITHOUT PROPER FIBER CONNECTION, LED's DO NOT INDICATE CORRECT OPERATIONAL STATUS OF THE UNIT.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc. could void the user’s authority to operate the equipment.
Contacting us For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact us during business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time). Sales and support contact information North America Toll-free: 855.286.8889 in the US, including Alaska and Hawaii; Puerto Rico; Canada. Outside the toll-free area: 503.885.5700.
Product Disassembly Instructions for WEEE Per European Directive 2002/95/EC Waste Electrical and Electronic Equipment Required Tools: One number 2 Phillips (crosstip) screwdriver. One number 2 flat screwdriver. For the enclosed box version: 1. Locate and remove box cover securement screws. Usually, but not limited to, at least 4 screws. 2. Lift off box top cover. 3. Locate and remove securement screws for printed circuit board. 4.
Copyright Trademarks and patents Manufacturer Certification ACMA compliance Canada European Union directives © 2011 UTC Fire & Security. All rights reserved. Interlogix and IFS names and logos are trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. UTC Fire & Security Americas Corporation, Inc.