Spec Sheet

VR1500WDM-CC
IFS Video with One-Way Data
IFS
®
Line / Fiber Transmission
interlogix.com
STANDARD FEATURES
• AM Video Transmission
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Supports RS-232 or RS-422 Data Interfaces
• Transparent to Data Encoding/Compatible with Major
CCTV Camera Manufactures
• Full Range Automatic Gain Control (AGC)
• No In-field Electrical or Optical Adjustments Required
• Power, Contact Closure, Data In and AGC Status Indicating
LED’s to Monitor System Performance
• Integrated WDM for Greater Product Reliability
• Distances up to 2.5 miles (4 km) without Repeaters
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Comprehensive Lifetime Warranty
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
1 µw
(-30 dBm)
VT1500WDM-CC
850/1310 nm
VR1500WDM-CC
Video
(Coax)
Control
Data
1 Fiber
62.5/125µm MM
VT1500WDM
up to 2.5 miles
(4 km)
ifs
Internation al
Fiber
Systems
Incorporate d
203.426. 1180
Contact
Closure
Contact
Closure
SYSTEM DESIGN
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): > 55 dB @ 10 dB ATTN.
DATA
Data Interface: RS-232, RS-422
Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-100 Kbps (NRZ)
LOSS OF RELAY
Loss of Video
Relay (Optional): SPST Relay
50 v, 0.25 A Contact Rating
(Normally Open)
WAVELENGTH 850/1310, Multimode
NUMBER OF FIBERS
VR1500WDM-CC: 1
CONNECTORS
Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video and Sync: BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL
Power: 12 VDC @ 200 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current
Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†
† May be extended to condensati conditions by adding suffix ‘–C’ to model
number for conformal coating.
SPECIFICATIONS
TECHNICAL SPECIFICATION
VIDEO WITH ONE-WAY DATA
VR1500WDM-CC
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
TRANSMITTER
RECEIVER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
MODEL
OUTPUT MODEL
SENSITIVITY
25 µw
(-16 dBm)
Multimode
62.5/125µm
**
2.5 miles (4 km)
VR1500WDM-CC
14 dB
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]
16 Commerce Road
■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
10/10/06
OVERVIEW
The IFS VR1500WDM-CC Series video and data transceiver supports
the simultaneous reception of video and one-way return data
over one optical fiber. The module is universally compatible with
major CCTV camera manufactures and supports RS-232 and
RS-422 data interfaces and all major data protocols. Plug-and-play
design ensures ease of installation requiring no electrical or optical
adjustments. The modules incorporate power, contact closure,
data in, and AGC status indicating LED’s to monitor proper system
operation. The unit features a contact closure input that allows an
additional device such as a dome tamper switch or alarm input to
be added and its signal transmitted back to the monitoring location.
This feature eliminates the need for installing additional wiring to
support the alarm contact closure. The module is available in either
stand-alone or rack mount versions.
APPLICATION EXAMPLES
• CCTV with One-Way PTZ Camera Control
• CCTV with Remote Signalization
SYSTEM DESIGN
Series