Data Sheet

V
R1100CC
Series
IFS AM Video Receiver with AGC
and Contact Closure
IFS
®
Line / Fiber Transmission
interlogix.com
OVERVIEW
The IFS VR1100CC Series video receiver supports a simultaneous
AM video signal with contact closure over one multimode fiber
optic cable. The receiver utilizes automatic gain control (AGC) and
is compatible with the IFS VT1101M AC, VT1001 and VT1101M
transmitters. Plug-and-play design ensures ease of installation
requiring no electrical or optical adjustments. The receiver incorpo-
rates power and AGC status indicating LED’s for monitoring proper
system operation. The module is available in either stand-alone or
rack mount version.
APPLICATION EXAMPLES
• CCTV (Fixed Video)
SYSTEM DESIGN
STANDARD FEATURES
• AM Video
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Full Range Automatic Gain Control (AGC)
• Hot-Swappable Rack Modules
• No In-field Electrical or Optical Adjustments Required
• Power and AGC Status Indicating LED’s to Monitor System
Performance
• Automatic Resettable Fuses on all Power Lines
• Comprehensive Lifetime Warranty
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
VT1101M
Video
(Coax)
1 Fiber
62.5/125μ m MM
mounted to back
of camera
VR1100CC
up to 2.5 miles
(4 km)
ifs
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Contact
Closure
Contact
Closure
Specifications
Video
Video Output: 1 volt pk-pk (AGC controlled)
Bandwidth: 5 Hz - 10 MHz (At 6 dB Attenuation)
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB at 10 dB Attn.
Contact Closures
Solid State Relay: 24 VAC/VDC @ 170 mA
Wavelength 850 nm, Multimode
Number Of Fibers 1
Connectors
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
ElectricaL & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Ordering Information
System Design
Part Number Optical Pwr. Budget Max. Distance*
Multimode
62.5/125μm**
1 2.5 miles (4 km)
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
VR1100-CC
Fibers Required
4 dB
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
AGC Video/Contact Receiver (850 nm)
VR1100-CC is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
Accessories♦
Options
Description
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [e-mail]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Agency compliance