Data Sheet

North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
V I C 5211
IFS Aiphone Video
Intercom System
Specications subject to change without notice.
© 2012 Interlogix.
All rights reserved.
210-3600 2012/10 (71654L)
interlogix.com
Specifications
Station Description
Intercom remote station Push to call; Audio In/Out - 3W (8-20 ohms); 0.5A relay contact (N.O.)
Master station Audio In/Out; Contact Closure (to Remote)
Audio
Bandwidth 300 Hz - 5 kHz
Video
Video Input 1 volt pk-pk (75 ohms)
Bandwidth 5 Hz - 6 MHz
Differential Gain <5%
Differential Phase <5°
Tilt <1%
Signal-to-Noise Ratio
(SNR)
60 dB (minimum)
Wavelength 850/1310 nm, Multimode
Number of fibers 1
Connectors
Optical ST
Power, Audio and Contact Terminal Block with Screw Clamps
Video BNC
Electrical & Mechanical
Power
Surface Mount Remote 24VACCT
Surface Mount Master 12VDC
Rack From Rack
Number of Rack Slots 2 (Master Only)
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (in./cm.) (LxWxH)
Remote 10.8 x 5.7 x 1.0 in. (27.5 x 14.5 x 2.5 cm)
Master Surface Mount 7.0 x 4.9 x 2.0 in. (17.8 x 12.5 x 5.1 cm)
Master Rack Mount 7.7 x 5.0 x 2.0 in. (19.6 x 12.7 x 5.1 cm)
Shipping Weight < 2 lbs./0.9 kg
Environmental
MTBF > 100,000 hours
Operating Temperature -40°C to +74°C
Storage Temperature -40°C to +85°C
Relative Humidity 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Ordering Information
Part Number Description Fibers Required Optical Pwr. Budget Mx. Distance*
Multimode
62.5/125µm**
VIC5211M
VIC5211R
Video Receiver / Intercom Master (1310/850 nm)
Video Transmitter / Intercom Remote (850/1310 nm)
1 14 dB 2.5 miles (4 km)
Accessories***
PS-24VACCT 24Volt AC Center Tap Transformer (Included with VIC5211R)
PS12VDC1.5A-U 12Volt DC AC Plug-in Power Supply (Included with VIC5211M)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.
**For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
***2-year warranty on power supplies.
Agency Compliances
• FCC
• CE
System Design
Video
(Coax)
Audio
Video
(Coax)
1 Fiber
62.5/125μm MM
VIC5211M
Audio
VIC5211R
up to 2.5 miles
(4 km)
ifs
International
Fiber
Systems
Incorporated
ifs
International
Fiber
Systems
Incorporated
Contact Input
Contact Output