Data Sheet

VAD7000 Series
IFS Bi-Directional Video, Audio and
Data
IFS
®
Line / Fiber Transmission
interlogix.com
OVERVIEW
T
he IFS VAD7000 Series video, audio and data transceiver supports
t
he simultaneous bi-directional transmission of video, audio and
data over one or two multimode fiber optic cables. The modules
use frequency modulation (FM) for superior transmission of video,
data, and balanced or unbalanced line-level audio (2.2 V pk-pk).
The modules are universally compatible with major CCTV camera
manufacturers and support RS-232 and RS-422. Plug-and-play
design ensures ease of installation requiring no electrical or optical
adjustments. The modules incorporate power data transmit, data
receive, audio transmit and audio receive status indicating LED’s
to monitor proper system operation. The modules are available in
either stand-alone or rack mount versions.
APPLICATION EXAMPLES
• CCTV with Bi-Directional Audio and PTZ Camera Control
• Remote Court Arraignment
• Distance Learning
• Video Conferencing
SYSTEM DESIGN
STANDARD FEATURES
• FM Video Transmission reduces ghosting, jitter and cross-talk
between channels, providing superior video transmission
• NTSC, PAL, SECAM Compatible
• Automatic Resettable Fuses on all Power Lines
• 600 Ohms Audio Input Impedance
• Transmits Bi-directional Balanced or Unbalanced Line-Level Audio
(2.2 Volts Peak-to-Peak)
• Transmits Bi-directional RS-232 and RS-422 Data Interfaces
• Data rates up to 100 kbps
• Transparent to Data Encoding/Compatible with Major CCTV
Camera Manufacturers
• NTCIP Compatible
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock,Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment
• No In-field Electrical or Optical Adjustments Required
• Power Status Indicating LED to Monitor System Performance
• Hot-Swappable Rack Modules
• Full Color Compatibility
• Distances up to 2.5 miles (4 km) without Repeaters
• Comprehensive Lifetime Warranty
GE
Security
Video
(Coax)
Video
(Coax)
Control
Data
Amp/Speaker Amp/Speaker
Pre-Amp Pre-Amp
Video
(Coax)
Video
(Coax)
Control
Data
1 Fiber
62.5/125μm MM
up to 2.5 miles
(4 km)
VAD7010WDMA
VAD7010WDMB
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
PTZ Control
PTZ Control
Specifications
Video
Video Input/Output: 1 Volt Pk-to-Pk
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >60 dB
Data
Data Interface: RS-232, RS-422
Data Format: NRZ, NRZI, Manchester, Bi-phase
Data Rate: DC-100 Kbps (NRZ)
Audio
Max. Input/Output Signal: 2.2 Volt Pk-to-Pk
Bandwidth: 20 Hz - 20 kHz
Wavelength 850 nm and 850/1310 nm, Multimode
Number Of Fibers VAD7000: 2, VAD7000WDM: 1
Connectors
Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video and Sync: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power:
Surface Mount: 24 VAC - C.T. @ 800 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Max. RG59 Cable Length: 750 ft.
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm
Rack Mount: 7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 5.1 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
System Design
Part Number Optical Pwr. Budget Max. Distance*
Multimode
62.5/125μm**
2.5 miles (4 km)
2.5 miles (4 km)
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
VAD7000A
VAD7000B
VAD7000WDMA
VAD7000WDMB
2
1
Fibers Required
14 dB
14 dB
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
FM Video, Audio and Data Transceiver (850 nm)
FM Video, Audio and Data Transceiver (850/1310 nm)
FM Video, Audio and Data Transceiver (1310/850 nm)
Accessories
♦
Options
Description
Ordering Information
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [e-mail]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
MADE IN THE USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
AGENCY COMPLIANCE