TruVision TVM-2002 / 2202 / 2212 2402 / 2702 / 3202 / 4002 Monitors User Manual P/N 1073347-EN • REV A • ISS 30JAN18
Copyright European Union directives © 2018 United Technologies Corporation This product complies with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved. Trademarks and patents The TruVision name and logo is a trademark of United Technologies.
Content Important safeguards 1. Important safeguards 1 Introduction 2 Features 2 Assembling the monitor 3 Disassembling the monitor 3 Attaching the monitor mount 4 Connections 4 Control panel 5 Remote control (TVM-2702 / 3202 / 4002) 5 Changing a monitor parameter 6 Hot keys 7 Adjustment procedure 7 OSD functionality 7 VGA menu 8 CAM menu (HDMI/BNC) 10 HDMI/VGA menu 12 Do not block any ventilation openings.
7. 8. Lightning: For added protection during a lighting storm or when this unit is left unattended and unused for long periods of time, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to lightning and power line surges. packing materials so that the monitor can be properly stored or transported. Features The monitor is designed for use in a small work area or for those who need more work space on the desk.
Assembling the monitor TVM-2402/2702 models The monitors are designed for use on a desktop. The arm of the monitor stand is shipped preinstalled on the monitor. To assemble the monitor: 1. Put a smooth pad or cloth on a level surface. Place the monitor on the surface facing downwards. 2. TVM-2002 only: Insert the arm of the monitor stand into the slot on the back of the monitor as shown below. 3. Insert the arm of the monitor stand into the pedestal foot provided as shown below. 4.
TVM-2002 model TVM-2202/2212 models The monitor’s installation surface is compatible with other types of VESA standard stands. Hole spacing: 100 x 100 mm Screw length: 8 to12 mm Connections TVM-2402/2702 models TVM-3202/4002 models 1. AC Input 2. AUDIO IN Audio signal input. 3. CAM IN (not available on TVM-2212) Composite signal input. 4. CAM OUT (not available on TVM-2212) Composite signal output. 5. HDMI HDMI signal input. 6. VGA RGB signal input.
Control panel Secondary Function: Moves the cursor to the right in the OSD window and increases the value of any selected menu item. TVM-2002/2202/2212/2402/2702 4. AUTO Primary Function: Automatically adjusts the display to the most optimal setting possible. (VGA mode only) Secondary Function: Selects the submenu. 5. POWER Switches the monitor on and off. TVM-3202/4002 1. Remote control (TVM2702 / 3202 / 4002) MENU Turns the OSD window on.
R1 POWER Turns the monitor on from stand-by or off to stand-by mode. R2 TV/AV (input source) Selects the signal source from multiple input sources. R3 MUTE Turns the sound on and off. R4 NUMBER Buttons Press the number buttons in order of 7,8,9,0 to unlock the keypad lock. R5 LAST CH Not used. R6 INFO Information display. R7 PICT MODE Selects preferred picture settings. R8 SLEEP Set the sleep timer. R9 MENU Display a main menu.
3. With a menu selected use the MENU button to select the submenus. 4. Use the ◀/▶ buttons to select a submenu function. 5. Press the MENU button, then make adjustments as necessary using the ◀/▶ buttons. 6. To exit, press AUTO. Adjustment procedure Hot keys ▶/▲ When the OSD does not appear on-screen, press the ▶or ▲ button to: Select the signal input in order (CAM - VGA – HDMI). OSD functionality TMV-2212 only: Select and adjust brightness using the ◀/▶ buttons.
VGA menu 4-3 DCR Not used. Picture 4-4 DCC Not used. 4-5 H-Position Not used. 4-6 H-Size Not used. 4-7 V-Position Not used. 4-6 V-Size 1. Brightness Adjust the brightness of the image. 2. Not used. Contrast (VGA Setting) Adjust the contrast of the image (the difference between light and dark areas on the screen). 3. Color Tone Choose a different preset color temperature or set customized color parameters (Normal/Warm/Cool/User). (Advanced Setting) 5.
5-5 Clock System Adjust the width (horizontal size) of the screen image to fine tune the display. Sound 1. Menu Language Select the OSD language. 2. 1. 2. Treble Adjust the treble sound (User must be selected in Sound mode). 5. Equalizer OSD Time out Adjust the display of the OSD menu (10 to 60 seconds). 4. OSD Transparency Adjust the OSD transparency (Off/Low/Middle/High). Bass Adjust the bass sound (User must be selected in Sound mode). 4. 3.
7. Time Setting 7-1 Time Not used. CAM menu (HDMI/BNC) Picture 7-2 Sleep Timer Set the sleep timer. 7-3 Auto Sleep The monitor turns off when it does not receive any signal from the remote control or any button within the time set up (Off/1 Hour/2 Hours/5 Hours). (An on-screen warning appears before the configured automatic shutdown time). 8. Memory Recall Reset the screen to the factory preset display settings. 1. Picture Mode Selects the picture mode (Standard/Movie/Dynamic/User/Eco). 2.
(Advanced Setting) Sound 8. 1. Advanced Setting Choose a different preset sound mode or a customized sound. (Standard/Movie/Music/User) 8-1 Noise Reduction Reduce the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High). 2. 8-2 Back Light Adjust the back light to be brighter or darker. 3. 8-4 DCC Turns DCC on or off. 8-5 H-Position Not used. 8-6 H-Size Bass Adjust the bass sound (User must be selected in Sound mode). 4.
1. Menu Language (An on-screen warning appears before the configured automatic shutdown time). Selects the OSD language. 2. Screen Format Selects the aspect ratio (16:9/4:3/ZOOM1/ZOOM2/FULL(CAM mode only)). 3. OSD Time out Adjust the display time of the OSD menu (10 to 60 seconds). 4. 9. Memory Recall Reset the screen to the factory preset display settings. Lock OSD Transparency Adjust the OSD transparency. 5. Power on Status Not used. 6. Blue Screen Selects the background color. 7.
2. Brightness OSD menu Adjust the brightness of the image. 3. Color Temp. Adjust the color temperature (Red/Green/Blue). Options are 9300K, 6500K, 5500K, and USER defined. 4. Auto Adjust Adjust the clock, phase, and position automatically (VGA mode only). 5. Color Adjust Adjust the color of the image (VGA mode only). 1. Language Selects the OSD language. 2. OSD H. Pos Adjust the position of the OSD menu horizontally (left or right). Picture 3. OSD V.
3. Signal Source Selects VGA or HDMI signals. 4. 5. Aspect Ratio The Out of Range screen appears when the applied frequency is under or over normal range. Normal range (non-interlaced mode only): Selects the aspect ratio (16:9/AUTO/4:3). H: 30 to 80 kHz DCR V: 56 to 77 Hz The dynamic contrast ratio (DCR) automatically adjusts the screen brightness. Turns DCC on or off. Reset Press any key to cancel.
Issue Solution Image is unstable Check if the signal cable is suitable to the video card. Image is not centered, too small, or too large Adjust Clock or H&V Center to get the proper image. Picture bounces or a wave pattern is present in the picture Keep the devices that may cause electrical interference away from the monitor. Picture is blurred Adjust Contrast and Brightness. No sound Check the audio cables are correctly connected to the computer.
Specifications TVM-2002/2202/2212/2402 models TVM-2002 TVM-2202 TVM-2212 TVM-2402 Panel (size and type) 19.53” LED backlit 21.5” LED backlit 21.5” LED backlit 23.6” LED backlit Pixel Pitch (mm) 0.2265(H) x0.221(V) 0.24825(H) x 0.24825(V) 0.24825(H) x 0.24825(V) 0.2715(H) x 0.
TVM-2002 TVM-2202 TVM-2212 TVM-2402 Video In/Out (BNC) 1/1 1/1 - 1/1 VGA In (15 Pin D-Sub) 1 1 1 1 HDMI 1 1 1 1 Stereo Audio In (3.
Dimension W x H x D (box) TVM-2002 TVM-2202 TVM-2212 TVM-2402 517 × 127 564 × 436 564 × 436 614 × 445 × 343 mm × 144 mm × 144 mm × 109 mm (20 × 5 (22 × 17 (22 × 17 (24 × 18 × 14 inch) × 6 inch) × 6 inch) × 4 inch) Weight (without stand) 2.4 kg (5 lb.) 3.3 kg (7 lb.) 3.3 kg (7 lb.) 3.5 kg (8 lb.) Weight (with stand) 2.8 kg (6 lb.) 3.9 kg (9 lb.) 3.9 kg (9 lb.) 3.9 kg (9 lb.) Weight (Gross with box) 3.6 kg (8 lb.) 5.3 kg (12 lb.) 5.3 kg (12 lb.) 5.4 kg (12 lb.
TVM-2702 TVM-3202 TVM-4002 Viewing Angle (H/V) 170°/160° 178°/178° 178°/178° Contrast Ratio 1000:1 1000:1 5000:1 Response Time 5 ms 8 ms 9.
TVM-2702 TVM-3202 TVM-4002 OSD Language English, French, Spanish, German, Italian English, French, Spanish, German, Italian English, French, Spanish, German, Italian Remote control Yes Yes Yes Power Consumption < 40 W < 45 W < 60 W Input Voltage 100 ~ 240 VAC 100 ~ 240 VAC 100 ~ 240 VAC Filter Type 3D Comb filter, Deinterlace 3D Comb filter, Deinterlace 3D Comb filter, Deinterlace Dimension W x H x D (without stand) 647 × 392 × 49 mm 728 × 433 × 51 mm 907 × 522 × 48 mm (25 × 15 ×
The specifications can change without notice. The panel may have some defective pixels (pixels that are slightly lighter or darker, for example) due to a characteristic of the panel. But there is no defect in the product itself. Factory preset timings Pixel Format Horizontal Freq. (KHz) Vertical Freq. (Hz) 720 x 400 31.469 70.087 640 x 480 31.469 59.940 640 x 480 37.861 72.809 640 x 480 37.500 75.000 800 x 600 37.870 60.317 800 x 600 48.077 72.188 800 x 600 46.875 75.
22 TruVision Monitor User Manual
