Installation Manual

Installation Manual 19
Configuration
Set up the camera’s network and streaming parameters so that the camera can be
controlled over the network. For further information, please refer to the “TruVision
Covert IP Camera Configuration Manual”.
Access the SD card
Insert a SD card up to 128GB for local storage as a backup in case the network fails.
The card is not supplied with the camera.
Video and log files stored on the Micro SD card can only be accessed via the Web
browser. You cannot access the card using TruVision Navigator or a recording device.
Use the camera with an Interlogix NVR and TruVision
Navigator
The camera can be connected to an Interlogix NVR or hybrid DVR or directly to
TruVision Navigator. Please refer to the user manual of TruVision Navigator and/or
NVR or hybrid DVR for instructions.
Specifications
TruVision covert IP cameras
Electrical
Voltage input
12 VDC ± 10%, PoE (IEEE 802.3af)
Power consumption
Max. 6.5 W
Miscellaneous
Connectors
DC jack flying lead, RJ45 flying lead
Operating temperature
-30 to 60°C (-22°F to 140°F)
Dimensions
78 × 105 × 32 mm (3.07 × 4.13 × 1.25 in.)
Weight
210 g (0.46 lb.)