Installation Manual

14 Installation Manual
3. Cover the installed L-shape lens unit with the enclosed cover to finish the
installation.
Pinhole lens for covert mounting:
1. See section “Prepare covert holes with adhesive tape” on page 11 on preparing
the covert hole. Keep the mounting surface clean and dry for the adhesive
mounting.
2. Remove the protective film from the adhesive tape and firmly adhere the tape on
the pinhole lens mounting bracket. Align the bracket with the prepared covert hole
and firmly adhere it on mounting surface.
3. Insert the pinhole lens into the mounted bracket and adjust the lens position fitting
with the mounting surface.