User Manual
40 TVE-400/800-1600 H.264 IP Video Encoder User Manual
Encoder management
Searching system logs
Many events of the encoder, such as operation, alarms and notifications, are
logged into the system logs. They can be viewed and exported at any time.
Note: Connect a NetHDD to the encoder before starting the log search. The
network disc must be initialized.
To search system logs:
1. Click the Log button on the menu toolbar. The Log window appears.
2. Select the search start and end times.
3. Under Major Type and Minor Type, select an option from the drop-down list.
The minor type list of options available depends on the option selected under
major type.
4. Click the Search button. A list of results appears in the panel below.
5. Click Save Log to save a log file to a local directory.
Restoring default settings
To restore the default factory settings:
1. Click Configuration > Maintenance.
2. Click Restore or Default.
Restore: All parameters except those for IP address, subnet mask, gateway,
and server port are restored to factory default settings.
Default: All parameters are restored to factory default settings.
3. Click OK to confirm you want to restore default settings.