User Manual
TVE-400/800-1600 H.264 IP Video Encoder User Manual 35
Pre-record: This is the time the camera starts recording before the scheduled
time or event. The times available are: No pre-record, 5 s, 10 s, 15 s, 20 s, 25
s or 30 s.
Post-record: This is the time the camera continues to record after the
scheduled time or event. The times available are: 5 s, 10 s, 15 s, 20 s, 25 s or
30 s.
10. Click OK. Return to the Record Schedule window.
11. Click Save to save the settings.
To make redundant recordings:
Use this option to make a back-up of recordings as a safeguard against losing all
the files in case of disk failure.
Note: You must have one NetHDD property identified as redundant to do
redundant recording.
1. Configure the recording schedule of a camera.
2. Click Advanced in the Record Schedule window.
3. Under Redundant Record select the Yes.
4. Click OK. Return to the Record Schedule window.
5. Click Save to save the settings.
To auto delete recordings:
1. Click Configuration > Device Configuration > Camera Settings > Record
Schedule. The Record Schedule window appears.
2. Configure the recording schedule of a camera.
3. Click Advanced in the Record Schedule window.
Under Expired Time select the number of days after which recorded video
from the specified camera is permanently deleted from the HDD.
4. Click OK. Return to the Record Schedule window.
5. Click Save to save the settings.
Managing user accounts
By default the encoder comes with three user accounts: an Administrator
account, an Operator account and a Guest account. These accounts provide
multiple levels of access and functionality. See Table 2 on page 36 for a
description of the different user accounts.