User Manual

34 TVE-400/800-1600 H.264 IP Video Encoder User Manual
To configure a scheduled recording:
1. Click Device Configuration > Camera Settings > Record Schedule. The
Record Schedule window appears.
2. Select the camera you want to configure.
3. Check the Enable Schedule box. If left unchecked, the encoder will not
record.
4. Click Edit to configure the recording settings.
5. Configure the recording schedule:
All day recording: Check All Day.
Segment recording: Check Segment Record. Check the day of the week
required and set the start and end time for recording. You can schedule up to
eight time periods in a day. The segments cannot overlap.
6. Select a recording type.
This setting instructs the encoder to begin recording when an alarm is
triggered. The recording types available are: Normal, Motion, Alarm, Motion
or Alarm, Motion and Alarm.
Note: If Motion, Alarm, Motion or Alarm, Motion and Alarm types are selected,
you must also configure the alarm linking method to be used. See “Motion
detection on page 24 and “Alarm input settings” on page 27.
7. Copy the schedule to other days of the week.
Check Select All to copy the schedule to all days of the week.
To copy these settings to another day, check the days required and click
Copy.
Note: To configure different schedules for other days, click the tab for the
desired day and set the schedule.
8. Click OK to save the settings. Return to the Record Schedule window.
9. Schedule pre and post recording times.
Click Advanced and select the desired times.