User Manual

28 TVE-400/800-1600 H.264 IP Video Encoder User Manual
- Send e-mail: Send an e-mail with alarm information to a user or users
when an event occurs.
Under Trigger Alarm Output select the channel to trigger an external alarm
output when a motion detection event occurs. See “To set up an alarm
output” on how to set up an external alarm output.
Select the channel to trigger recording when a motion detection event occurs.
If the camera is PTZ, select PTZ linking.
6. Click Save to save settings.
Video loss
Video may be lost if the video cable or camera develop a fault or are damaged.
You can set up your encoder to detect video loss and trigger a system
notification.
To configure video loss detection:
1. Click Device Configuration > Camera Settings > Video Loss. The Video
Loss window appears.