User Manual

TVE-DEC12 User Manual 31
To set up a roaming tile:
1. Go to Video Wall.
2. If you have not already done so, configure the video wall layout and add the
devices, such as camera or recorder streams. Define the multiview layout of the
selected video monitor.
3. Drag the desired tile from one of the monitor windows and place it anywhere on a
monitor window.
Note: By default the roaming tile is on top of the other tiles. To place it underneath,
click the ”Send to back layer” button.
4. Double-click the roaming tile to zoom in or out of the tile.
Set up scenes
A Scene is a custom view of the decoder. This feature allows you to store predefined
layouts with streams so that it is easy to call them up when needed. The output type is
not stored when storing a scene.
By default, Scene1 is always available and cannot be deleted. When first using the
decoder, Scene 1 is empty. There are no streams yet assigned to it.
You can configure up to a maximum of eight scenes.
Example:
Streams have been assigned to the monitors (in this example a multiview layout on the
left monitor and two full-screen recorder streams on the other monitors). See Figure 9
on page 32.