User Manual

30 TVE-DEC12 User Manual
To select a predefined layout:
1. Go to Video Wall.
2. Add a stream to a monitor. By default, the stream will be displayed in full screen
mode.
3. Select the stream so that you see the red rectangle.
4. Click the multiview button and select the desired layout.
Note: The maximum number of streams that can be shown simultaneously on all
monitors is 16.
5. Once the desired layout is selected, you can assign streams to each video tile in the
layout.
Freely position a video tile
The decoder lets you freely position a video tile anywhere on another monitor screen.
This can be useful if, for example, you have two monitors located far apart. This
decoder feature lets you drag one or more video tiles from one monitor to the other
monitor so that you can easily observe the selected roaming tile on the other monitor.
See Figure 8 below for an example of the result.
Note: The roaming tile feature is not available for BNC monitors. It can only be used
with the HDMI and VGA monitors.
Figure 8: Example of using the roaming tile feature
Two monitors (HDMI and VGA) located far apart. One screen has multiview.
In the decoder, drag and drop a video tile of one monitor to the other monitor. The result will look like this
on the monitors: