User Manual

16 TVE-DEC12 User Manual
DynDNS: Select DynDNS and enter the server address for DynDNS. In the decoder
domain name field, enter the domain name obtained from the DynDNS web site.
Then enter your user name and password registered in the DynDNS network.
For example:
Server address: members.dyndns.org
Domain: mycompanydvr.dyndns.org
User name: myname
Password: mypassword
- or -
NO-IP: Enter server address (for example, dynupdate.no-ip.com). In the host name
field, enter the host obtained from the NO-IP web site. Then enter the user name
and password that are registered with the No-IP network.
4. Ask your ISP service provider for your DNS server address or look it up in the
browser interface settings of your router.
Go to Network and enter the preferred and alternate DNS server addresses as well
as the default gateway address.
5. Click Save to save the settings.
HTTPS settings
Using HTTPS (Hypertext Transfer Protocol Secure) is a secure protocol that provides
authenticated and encrypted communication. It ensures that there is a secure private
channel between the decoder and the PC.
You can create self-signed server certificates as well as request certified server
certificates to ensure your network security. For larger companies, a corporate
certificate might be available with the IT department.
Note: You must run Microsoft Internet Explorer as administrator.
To create a server certificate:
1. Go to Configuration > Network > HTTPS.