User Manual

TVE-DEC12 User Manual 11
Maintenance
Use this menu to:
• Reboot the decoder: The administrator can reboot the decoder.
• Restore/Default the decoder: The administrator can reset the decoder to the
factory default settings. Network information such as IP address, subnet mask, and
gateway are not restored to factory default settings.
Note: Only the administrator can restore factory default settings.
• Import/Export configuration settings: The administrator can also export and
import configuration settings from the decoder. This is useful if you want to copy the
configuration settings to another device, or if you want to make a backup of the
settings.
• Update the decoder firmware: The administrator can update the decoder firmware
via the decoder web browser. Non-admin users can also upgrade the firmware if
they have upgrade permission. The decoder firmware can be updated using
TruVision Navigator (version 8.1 SP2). For further information, refer to the TruVision
Navigator user manual. The firmware upgrade file is labeled tvedec12.dav.
Figure 5: Maintenance menu
To reboot the decoder:
1. Go to Configuration > System > Maintenance.
2. Click the Reboot button.
3. In the pop-up window, enter your admin password and click OK.
The system reboots.
To restore parameters to default factory settings:
1. Go to Configuration > System > Maintenance.