User Manual

10 TVE-DEC12 User Manual
System configuration
Log in and go to the Configuration menu to configure the general settings of the
decoder. The System menu has three main menus:
• System settings
• Maintenance
• User management
System settings
Use this menu to:
• Set and view the system Information, such as set the decoder name, and view the
version of the firmware and decoder.
• Set the parameters of the RS-232 communication port.
• Set the parameters of the RS-485 communication port.
To set up the system settings of the decoder:
1. Go to Configuration > System > System Settings.
2. To set up the decoder name and view the decoder’s system information, click the
System Information tab. Enter the decoder name, if desired.
3. To set up the RS-232 parameters, click the RS-232 tab. Select the desired RS-232
port, baud rate, data bit, stop bit, parity, flow control, and working mode parameters.
4. To set up the RS-485 parameters, click the RS-485 tab. Select the desired RS-485
camera number, baud rate, data bit, stop bit, parity, and flow control parameters.
5. Click the Save to save the changes.