User Manual

6 TVE-DEC12 User Manual
3. Enter the user name (default: admin) and password to log into the system. The
decoder’s main page appears, which by default is Video Wall (see Figure 3 on page
8).
Device manager network settings
Use TruVision Device Manager to find and configure the IP address and other
parameters of the device. This tool automatically identifies TruVision devices that
support “auto-discovery” anywhere on the network, even in different subnets.
To use the TruVision Device Manager:
1. Download the tool from our website.
2. Double-click the shortcut icon to open the tool. Click Device Manager to begin the
discovery process. The list of TruVision devices located on your network appears.
Note: The TruVision Device Manager can only detect devices that are on the same
LAN. The tool cannot detect devices placed on a VLAN.
3. Change the device settings as required. Click X on the top right corner when
completed.