Quick Start Guide

2 P/N 1073628-EN • REV A • ISS 08APR19
Figure 3: TVE Video Wall web page
Name Description
1.
Video Wall webpage Set up how you want the video wall to appear. Lets you select which device
is displayed on which monitor. Drag and drop devices from the device tree to
a monitor.
Note: Video images cannot be seen on the decoder web page.
2.
Video Wall Configuration
webpage
Define the monitor resolution and layout (number of rows and columns) on
the wall.
3.
Configuration webpage Configure the general settings of the decoder. See “Configuration” on page
4.
4.
Device tree List of devices connected to the decoder by their IP address or URL.
5.
Monitors The decoder can be used with HDMI, VGA and BNC monitors
simultaneously. Up to three monitors can be used.
6.
Scene list Create a list of stored pre-defined layouts with their streams so that they can
be quickly called up when needed.
7.
Multiview Select the desired multiview.
8
. Shortcut toolbar Save the scenes.
Stop decoding for all streams.
Refresh the screen.
The Send to Back button lets you switch the positions of overlapping
video tiles.