User Manual

TVE-DEC11 IP Video Decoder User Manual 7
5. The program requires a utility called WinPcap to be installed on the computer. If
it is already installed, go to step 6.
If the program is not installed, the WinPcap window appears. Follow the on-
screen instructions.
6. The TruVision Device Manager Wizard appears. Click Finish to complete its
installation.
Using the TruVision Device Manager
The setup will install the necessary files and place the following shortcut on your
desktop.
Figure 5: TruVision Device Manager shortcut icon
To use the TruVision Device Manager:
1. Double-click the shortcut icon to open the tool.
The Start window appears.
2. The list of TruVision devices located on your network appears.
Note: The TruVision Device Manager can only detect devices that are on the
same LAN. The tool cannot detect devices placed on a VLAN.