User Manual

26 TVE-DEC11 IP Video Decoder User Manual
2. Select an alarm output from the drop-down list.
3. Under Output Delay, select a time out option from the drop-down list.
The time out setting lets you define for how long a signal remains active after
the alarm has ended. Select a time out option: 5, 10, and 30 seconds, 1, 2, 5,
and 10 minutes, and Manual stop. If “Manual stop” is selected, the alarm output
will stop only when the alarm input is manually stopped.
4. Click Save to save settings.
Arming time
You can set up to eight arming schedules for alarm inputs.
To set up the arming schedules:
1. Click Configuration > Arming Time. The Arming Time window appears.
2. Select the day of the week and the start and end time periods during the day
when the alarm inputs and outs are armed. You can schedule up to eight time
periods in a day. Default is 24 hours.
Note: The time periods defined cannot overlap.
3. Click Save to save settings.
User account management
By default the decoder comes with an administrator user account. The administrator
can add, modify or delete users.
The Administrator can add, delete or configure parameters for all decoder functions.
There can only be one administrator. The user name is admin. The name cannot be
modified. The default password is 1234.
Note: Default passwords should be changed for security reasons.