User Manual
Table Of Contents
24 TVE-DEC11 IP Video Decoder User Manual
2. Input the values for the following parameters: RS-232 port, duplex mode, baud
rate, data bit, stop bit, parity type, and operation mode.
3. Click Save to save settings.
To set up RS-485 port:
1. Click Configuration > Serial Port Settings > RS-485 Port. The RS-485 Port
window appears.
2. Input the values for the following parameters: RS-485 camera number, duplex
mode, baud rate, data bit, stop bit, and parity type.
3. Click Save to save settings.