User Manual

TVE-DEC11 IP Video Decoder User Manual 23
To configure Telnet settings:
1. Click Configuration > Network Settings > Telnet. The Telnet window appears.
2. Check the Enable Telnet checkbox.
3. Enter the Telnet Password and confirm it.
4. Click Save to save the changes.
Note:
1. The Telnet user name is “root” as default, and cannot be changed.
2. The default Telnet password is “ab12!”
3. The password should be set with at least 4-character password with at least one
letter and one number.
Serial port settings
Use this menu to configure the settings of the RS-232 and RS-485 ports.
To set up RS-232 port:
1. Click Configuration > Serial Port Settings > RS-232 Port. The RS-232 Port
window appears.