User Manual

22 TVE-DEC11 IP Video Decoder User Manual
Option
Description
IPv4 address Enter the IP address for the decoder.
The default IP address is 192.168.1.70.
IPv4 Subnet mask Enter the subnet mask for your network so the decoder will
be recognized within the network.
Default value is 255.255.255.0.
IPv4 Gateway address Enter the IP address of your network gateway so the
decoder will be recognized within the network. This is
typically the IP address of your router.
Default value is 0.0.0.0.
DNS server Enter the domain name server to use with the decoder.
Default value is 0.0.0.0.
3. Click Save to save the settings.
To configure DDNS settings:
If your device is set to use PPPoE as its default network connection, you may set
Dynamic DNS (DDNS) to be used for network access.
Prior registration with your DDNS Provider is required before configuring the system
to use DDNS.
1. Click Configuration > Network Settings > DDNS. The DDNS window appears.
2. Check the Enable DDNS checkbox to enable this feature.
3. Select the DDNS Type from the drop-down list. Four different DDNS types are
selectable: IPServer, DynDNS, PeanutHull, NO-IP and ezDDNS.
4. Enter the Server Address and Port for DDNS Server.
5. Enter the User Name and Password that you applied from the server.
6. Click Save to save the settings.