User Manual

18 TVE-DEC11 IP Video Decoder User Manual
To set up the transparent channel:
1. Click Decoding Operation > Transparent Channel. The Transparent Channel
window appears.
2. Enter values for the following parameters:
Local Serial Port: Select the decoder’s serial interface from the drop-down list:
RS-232 or RS-485.
Remote Serial Port: Select the remote encoding device’s serial interface from
the drop-down list: RS-232 or RS-485.
Remote Host Address: Enter the IP address of the remote encoding device.
Remote Host Port: Enter the host port of the remote encoding device.
User Name and Password: Enter the user name and password used to log into
the encoding device.
3. Click Save to save the settings.