User Manual

TVE-DEC11 IP Video Decoder User Manual 17
To view the channel status:
1. Click Decoding Operation > Decoding Status > Decoding Channel. The
Decoding Channel window appears that lists the current status for all cameras.
Check display channel status
Use this menu to check the configuration information on the current channel. The
information is regularly updated automatically.
To view the channel status:
1. Click Decoding Operation > Decoding Status > Display Channel. The
Display Channel window appears.
Transparent channel
Use this menu to set up the transmission of transparent data between the encoder
and decoder. The decoder uses the RS-232 or RS-485 serial port to send
transparent data over the network.
Up to 64 encoders can be used to address a decoder.
Note: If RS-232 is selected as the local serial port, you must set up the operation
mode as transparent under Configuration > Serial Port Parameters > RS-232.