User Manual

16 TVE-DEC11 IP Video Decoder User Manual
3. In the Select Picture box, browse the desired picture and click Upload to
upload it.
4. Enter the X and Y co-ordinates to position the picture on screen.
5. Select how you want the picture displayed. Check Flash to have a picture that
flashes. If you want the picture to be transparent, disable Show this picture.
6. Click Save to save the settings.
Connection status
Use this menu to configure the channel used by the decoder for decoding and live
view. The information is regularly updated automatically.
To view the connection status:
1. Click Decoding Operation > Decoding Status > Connection Status. The
Connection Status window appears.
2. Enter values for the following parameters:
Decoding Camera No.: Enter the channel to be decoded.
Connection Status: Check the status of the decoding channel that is streaming
video from an encoding device.
Bitrate Transmission Rate: View the bit rate of the stream being decoded.
Get Stream Properties: The TruVision decoder can only support active mode. It
actively tries to get video streams from an encoder or NVR.
Check decoding channel status
Use this menu to check the current decoding channel for information such as the
channel number, decoding channel status, stream compression type and video
frame rate, for example. The information is regularly updated automatically.