User Manual

TVE-DEC11 IP Video Decoder User Manual 15
Enable/disable decoding channel
Use this window to enable or disable a decoding channel. The decoding channel
parameters remain unchanged.
To enable or disable a decoding channel:
1. Click Decoding Operation > Decode Control > Ch Enable/Disable. The Ch
Enable/Disable window appears.
2. Select the desired decoding channel from the drop-down list.
3. In the On/Off box, enable or disable the selected channel.
4. Click Save to save the settings.
Picture overlay
Use this function to overlay a picture on a decoded channel display. The picture can
be positioned anywhere on screen.
The picture must have a 24-bit BMP format. Its height and width should be 32X
pixel. A resolution up to 128 x 128 is supported.
To set up picture overlay:
1. Click Decoding Operation > Decode Control > Picture Overlay. The Picture
Overlay window appears.
2. Select the desired decoding channel from the drop-down list.