User Manual

14 TVE-DEC11 IP Video Decoder User Manual
Display settings
Use this window to configure the display channel, video format, output resolution
and display mode. There are three display mode formats; full screen, 4-screen, 9-
screen and 16-screen.
The decoder automatically detects the video mode (PAL/NTSC).
To set up the display settings:
1. Click Decoding Operation > Decode Mode > Display Control. The Display
Control window appears.
2. Click one of the output display buttons to select the output required: VGA, HDMI
or BNC.
Depending on the option selected the options displayed in the monitor property
window may change.
3. Select the output resolution from the drop-down list.
4. Select the display mode from the drop-down list.
5. Under the Tile Monitor Property window, select which video tile on the monitor
is associated with which channel. This option depends on the output display
option selected.
Click the and icons to enable or disable audio and image scaling
respectively for each channel.
6. Click Save to save the settings.