User Manual

TVE-DEC11 IP Video Decoder User Manual 13
2. Select the channel for playback from the Decoding Camera No. drop-down list.
3. Enter the channel parameters:
Remote Host Address: Enter the IP address of the encoding device.
Remote Host Port: Enter the port of the encoding device.
Remote Host Port: Enter the port of the encoding device.
Remote Host Camera No.: Enter the channel number of the encoding device to
be decoded.
User Name/Password: Enter the user name and password used to log into the
encoding device.
Playback by File: Enter the file name of the file to be played back from the
DVR. This is found from a search of the stored files on the DVR.
Playback by Time: Enter the start and end time of the file to be played back.
4. Click Save to save the settings.
5. Click to start playback.
Control playback by using the buttons on the toolbar . Click
to start, stop, slow forward, fast forward and turn audio on/off respectively.
Slow forward is 1/2X, 1/4, 1/8X and minimum. Fast forward is 2X, 4X, 8X and
16X.